Come across the battery-release latch and press down into it with one hand, and then pull the battery out of your case, setting the laptop computer battery aside.
The convenience given by the portability of a laptop can
become a hindrance due to screen malfunctions? it isn't easy to
connect a new monitor since you can with a desktop procedure. If the backlight
in the LCD screen has was unsuccessful, you can see just about any image. To fix all the
problem, the entire inverter board as well as its connected LCD cable will require
to be manually swapped out. Here below are the instruction for the
reference.
1. Check during the manual of your netbook or search the infomation with
the Internet to support the portion of the manufacturer抯 websites. Only
get that what style fo inverter board you may need for your computer, get
my Pavilion DV2000 Television screen as instance, I get a right one from an established site, HooToo. com, after which it i fix it by myself.
2. Turn off the particular laptop抯 operation system. De-activate the LCD screen
top. CTurn the whole laptop over so that the bottom end of the result is facing
up all the way to you. Locate the battery-release latch and press down into it
with one hand, and then pull the battery out of your case, setting the laptop computer battery aside.
3. Locate the rubber pieces over the edges and the surface of the LCD. Pop the
stopper pieces from the case by inserting an appartment object underneath
them after which it pulling out toward anyone. Use a screwdriver to get the
screws hidden beneath the stoppers.
4. Put the notebook back over and offered the LCD screen validate.
Slide a flat and also thin object, such like a screwdriver, directly
underneath the seam within the plastic bezel underneath typically the LCD screen.
Wiggle the screwdriver around gently until the bezel pops from the
case. Lift the bezel up and verify if there is an important cable running to
your motherboard. Disconnect the cable if you find one.
5. Pull true on the screen towards you, and then remove the idea from
the laptop. Locate the inverter board in the bottom of the screen and even
find the cable running within the inverter board to any motherboard. Pull
off the strip of tape over the board and remove any screws holding it with
place if there are any for your particular model of computer. Disconnect
the cable through the motherboard.
6. Connect any motherboard cable for plastic-type bezel and place typically the bezel
back onto the actual laptop case. Finally, just put the battery in the laptop
and power this on, and then as soon as the manufacturer抯 logo appear about the
screen, it mean you are successfull to install the brand new inverter
board and cable television rightly.
Article Tags:
Inverter Aboard
